[c-nsp] Why does the ME3600X not support VLAN mapping?

[Waris Sagheer (waris)]

Hi Richard,
Following vlan mapping syntax is not supported.

-Waris


-----Original Message-----
From: Richard Hartmann [mailto:richih.mailinglist at gmail.com] 
Sent: Friday, March 23, 2012 8:51 AM
To: Waris Sagheer (waris)
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Why does the ME3600X not support VLAN mapping?

Hi Waris,


> ME3600X does support VLAN mapping through EVC.
> Can you elaborate the requirement?

Indeed, it does; I found that out in the meantime; I just realized that several replies, and thus the resulting conversation, was off-list. No idea why, but as it wasn't me who took it off-list in the first place, I will refrain from bouncing the mails to this list.

Is the syntax of

   switchport vlan mapping enable
   switchport vlan mapping 123 654

deprecated? It's a lot simpler and cleaner than EVC if you need to remap VLANs, only.



Thanks for getting back to me in what, to this list, must have looked like a stale thread, Richard