[c-nsp] Apply service policy via Radius?

[Cassidy Larson]

Just resurrecting an old thread.

Anybody have any new information on "Per-user QoS policies via RADIUS" on 15.1?
I have a 1941 running 15.1(4)M1 that I'd like to accept the above, but
am unable to figure out the secret combo.

Thanks,

-c


On Mon, Mar 8, 2010 at 3:00 AM, Reuben Farrelly
<reuben-cisco-nsp at reub.net> wrote:
> What version of IOS code are you running?
>
> Just in case this apples to you, note that the feature "Per-user QoS
> policies applied via RADIUS" is broken in all versions of IOS 15.0, and as
> far as I can tell, many versions of 12.4T including 12.4(15)Tx and possibly
> earlier, on multiple platforms.  Apparently the code is "broken" on the 7200
> and "the feature is not present" on the ISRs.  I reported this bug to TAC
> and tested on both 7200 and ISR (2851) platforms.
>
> 12.4M works OK on both platforms so you might want to try out 12.4(25)c on
> either platform, where the code "exists" and "works".
>
> See CSCte95297 for the gory details.
>
> Reuben
>
>
>
> mb at adv.gcomm.com.au wrote:
>>
>> Hi,
>>
>> Have DSL users terminating on LNS(7204) via Eth, with radius auth -
>> Trying to apply the following service policy(Configured on LNS) upon
>> successful auth:
>>
>> policy-map JF-2MB-ADSL
>> class class-default
>>    shape average 1850000
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/