[c-nsp] ASR1004 slot/backplane/capacity question

[Sam Silvester]

On Wed, May 9, 2012 at 6:26 AM, David H <ispcolohost at gmail.com> wrote:
> Hi all, I've got a few general questions about the ASR.  On Cisco's
> site sometimes I see reference to the 1004 having a 20 gig capacity,
> other times 40.  Will the 1004 accept the ESP-40 and SIP40 interface
> cards to get to 40 gigs or is the maximum really the ESP-20 and SIP10
> cards?

Hi David,

I'll leave the other questions to somebody that knows better the
internals of the ASR platform, but I can confirm the ESP-40 and SIP40
work just fine on the ASR1004 (and this is a supported configuration).
I believe you need an RP2 however, but I'm not 100% on that point.

TR1#show platform
Chassis type: ASR1004

Slot      Type                State                 Insert time (ago)
--------- ------------------- --------------------- -----------------
0         ASR1000-SIP40       ok                    20w0d
 0/0      SPA-1X10GE-L-V2     ok                    20w0d
 0/1      SPA-10X1GE-V2       ok                    20w0d
 0/2      SPA-1X10GE-L-V2     ok                    20w0d
R0        ASR1000-RP2         ok, active            20w0d
F0        ASR1000-ESP40       ok, active            20w0d
P0        ASR1004-PWR-AC      ok                    20w0d
P1        ASR1004-PWR-AC      ok                    20w0d

Slot      CPLD Version        Firmware Version
--------- ------------------- ---------------------------------------
0         00200800            15.0(1r)S
R0        10021901            12.2(33r)XND
F0        1003190E            15.0(1r)S