[c-nsp] "show idprom int TeX/Y" stops working on sup720?

[Phil Mayers]

On 11/05/12 18:02, Mack McBride wrote:
> Failures are always fun.
> You may be able to reset the one line card and get it working.

To clarify, I was wondering if there was something a teeny bit more 
subtle e.g. "clear xxx" or "connect to the SP, issue the following 'test 
xxx' command" that someone might have come across.

Clearly, reloading the blade or box is the "obvious" approach, but the 
box is in service, and the outage undesirable.

> If that doesn't work then reloading the box would be the next step.
> And if that doesn't work I would suspect a problem with the blade itself.

I'm confident there's no hardware fault here, rather an IOS bug.