[c-nsp] Juniper equivalent for Cisco Cat 6500

[Mark Tinka]

On Wednesday, May 23, 2012 02:49:19 PM Andrew Miehs wrote:

> Ideally I would move to a pair of 6504s (VSS) as PE/CEs,
> bring MPLS right to the edge and terminate the SVIs
> directly on these boxes. The L2 access switches - 4510s
> would then hang per port channel off the 6504s... I am
> also considering suggesting using a single 6500, but the
> customer was extremely keen on redundant boxes.

Sounds like a job for the ME3600X. MPLS all the way into the 
Access is what it's massively good at.

Mark.