[c-nsp] Juniper equivalent for Cisco Cat 6500

[Andrew Miehs]

Thanks once again to everyone.

Will check out the brocade offering.
I had looked at the ME3xxx and 6524s but they only have 1g access ports. There is no ME4500-X...

I agree with daves suggestion and will probably be forced to go that route to save some money.

Sent from a mobile device

On 24/05/2012, at 5:39, "Dale W. Carder" <dwcarder at wisc.edu> wrote:
> 
> Should work fine on sup-2t.  We average about 100 CE (layer 2 only,
> typically 3750-12S stacks) per pair of cat6k-sup720.  Then there is only
> ipbase/SMI featureset downstream.  For us in aggregate that amounted to 
> .6M (list) savings.
> 
> I'm not saying this is ideal, but cheap and it works.