[c-nsp] Lot of input errors on a NPE-G1 interface

[Gert Doering]

Hi,

On Thu, May 24, 2012 at 02:30:59PM +0200, Mark Tinka wrote:
> > I recently had a similar issue with a 7201 (which is
> > effectively a NPE-G2). Keep in mind that a 7200 series
> > platform is 100% software-based.
> 
> Except for the part where they said the 4th Gig-E port is a 
> PCI-X connection to the board and can run at line rate 
> independently.
> 
> Never did quite figure that one out :-).

Well, I'd interpret that as "it is not connected to the PCI bus, so
won't eat bandwidth points from there".  Not as "will do distributed
anything".

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 305 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20120524/bd2a86fd/attachment.sig>