[c-nsp] BCP for carrier-delay msec 0, interface dampening and isis timers

[adam vitkovsky]

You might want to introduce some delay for interface coming up -to account
for some quick bounces before the dampening kicks in


interface TenGigE0/1/0/1
    carrier-delay up 10 down 0
    dampening


adam

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Jason Lixfeld
Sent: Friday, May 25, 2012 6:58 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] BCP for carrier-delay msec 0, interface dampening and isis
timers

Is there any sort of BCP for carrier-delay, interface dampening settings and
isis timers for XR and IOS?

I'm building a lab using these settings, but I'm curious what others are up
to...

! IOS
!
interface TenGigabitEthernet7/0/0
 dampening
 mtu 9216
 ip address 1.1.1.2 255.255.255.254
 no ip redirects
 ip router isis
 logging event link-status
 carrier-delay msec 0
 mpls ip
 mls qos trust dscp
 clns mtu 9199
!
router isis 21949
 net 00.0010.0100.1002.0000.00
 is-type level-2-only
 metric-style transition
 spf-interval 5 1 50
 prc-interval 5 1 50
 lsp-gen-interval 5 1 50
 log-adjacency-changes
 nsf cisco
!

! XR
!
interface TenGigE0/1/0/1
 cdp
 mtu 9216
 ipv4 address 1.1.1.3 255.255.255.254
 carrier-delay up 0 down 0
 dampening
!
router isis 21949
 is-type level-2-only
 net 00.0010.0100.1003.0000.00
 nsf cisco
 log adjacency changes
 log pdu drops
 interface TenGigE0/1/0/1
  address-family ipv4 unicast
!

Also, anyone have any ideas about what the XR equivalent to the isis
spf-interval, prc-interval and lsp-gen-interval settings would be?

Thanks in advance..
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/