[c-nsp] m-vpn
Aaron
aaron1 at gvtc.com
Tue May 29 11:18:36 EDT 2012
Thanks Arie, I'm trying to accomplish in ios xr 4.1.2 - got link for that ?
-----Original Message-----
From: Arie Vayner (avayner) [mailto:avayner at cisco.com]
Sent: Tuesday, May 29, 2012 10:15 AM
To: Aaron; cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] m-vpn
Aaron,
The MDT BGP address family syntax is relatively new, so might not have been
around when the book was released...
For a more recent source of information, I would suggest:
http://www.cisco.com/en/US/partner/docs/ios-xml/ios/ipmulti_mvpn/configu
ration/15-2mt/imc-mvpn-15-2mt-book.html
Arie
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Aaron
Sent: Tuesday, May 29, 2012 07:55
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] m-vpn
Hi all,
I've read through Chapter 7 of "MPLS and VPN Architectures Volume II"
regarding Multicast VPN.
I never saw any mention of enabling the ipv4 mdt address family under bgp.
Is this ipv4 mdt af something altogether different than what is spoken of in
the book ? .or did I totally miss something in that chapter about the ipv4
mdt af being implicitly enable somehow.
I'm just trying to accomplish mcast over my mpls L3VPN. This will be for my
high capacity mcast for catv for all my catv subscribers. 2-3 gbps
sustained 24x7. A couple different pe/ce will xmit and a couple different
pe/ce will rcv. I'd prefer to use ssm cause I don't wanna mess with rp's
and sup-optimal routing to and from rp and single point of failure on rp (so
I don't wanna mess with redundant rp either if I can simply do ssm)
Aaron
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list