[c-nsp] EARL L2 ASIC Search Engine has failed

[Jason Lixfeld]

No.  The issue has only repeated once since we replaced the hardware, so until it rears its head again and/or I can reproduce the issue at will, changing software is a little moot.

--

Sent from my mobile device


On 2012-05-31, at 8:21 PM, alumbis at gmail.com wrote:

> Have you tried other code to try to rule out a 15S bug? Maybe SRE latest?
> 
> 
> 
> On May 31, 2012, at 9:33 AM, Jason Lixfeld <jason at lixfeld.ca> wrote:
> 
>> 
>> On 2012-05-31, at 9:02 AM, Phil Mayers wrote:
>> 
>>> On 31/05/12 13:56, Jason Lixfeld wrote:
>>> 
>>>> I've run:
>>>> 
>>>> 'diagnostic start module<1-9>  test all' to test all the modules.
>>>> All seem to have passed.  Not sure if there are other diags to run.
>>> 
>>> At one point, those commands ran a sub-set of the diags; not sure if that's changed in recent versions, but a full diag suite is (highly) disruptive to traffic and (very) slow, so if you didn't see an outage, you haven't run them all.
>> 
>> It shut the linecards down, so I'm pretty sure it did what it was supposed to :)
>> 
>> This box is isolated, so the tests being disruptive are a non-issue.
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/