[c-nsp] EARL L2 ASIC Search Engine has failed

alumbis at gmail.com alumbis at gmail.com
Thu May 31 20:21:35 EDT 2012


Have you tried other code to try to rule out a 15S bug? Maybe SRE latest?



On May 31, 2012, at 9:33 AM, Jason Lixfeld <jason at lixfeld.ca> wrote:

> 
> On 2012-05-31, at 9:02 AM, Phil Mayers wrote:
> 
>> On 31/05/12 13:56, Jason Lixfeld wrote:
>> 
>>> I've run:
>>> 
>>> 'diagnostic start module<1-9>  test all' to test all the modules.
>>> All seem to have passed.  Not sure if there are other diags to run.
>> 
>> At one point, those commands ran a sub-set of the diags; not sure if that's changed in recent versions, but a full diag suite is (highly) disruptive to traffic and (very) slow, so if you didn't see an outage, you haven't run them all.
> 
> It shut the linecards down, so I'm pretty sure it did what it was supposed to :)
> 
> This box is isolated, so the tests being disruptive are a non-issue.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/



More information about the cisco-nsp mailing list