[c-nsp] Cisco BFD

[M K]

Thanks for the replies guys

From: ikiris at gmail.com
Date: Tue, 6 Nov 2012 09:58:29 -0600
Subject: Re: [c-nsp] Cisco BFD
To: adam.vitkovsky at swan.sk
CC: gunner_200 at live.com; cisco-nsp at puck.nether.net

BFD is not supported in dynamips last I looked.

-Blake


On Tue, Nov 6, 2012 at 9:50 AM, Adam Vitkovsky <adam.vitkovsky at swan.sk> wrote:


I came to conclusion that bfd doesn't work in dynamips it will always crash





adam

-----Original Message-----

From: cisco-nsp-bounces at puck.nether.net

[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of M K

Sent: Tuesday, November 06, 2012 2:43 PM

To: cisco-nsp at puck.nether.net

Subject: [c-nsp] Cisco BFD





Hi allI was trying to configure BFD with OSPF



I have the below configuration R1#sh run int f0/0.519Building

configuration...

Current configuration : 112 bytes!interface FastEthernet0/0.519

encapsulation dot1Q 519 ip address 20.5.19.19 255.255.255.0 ip ospf bfdend

R5#sh run int f0/0.519Building configuration...

Current configuration : 111 bytes!interface FastEthernet0/0.519

encapsulation dot1Q 519 ip address 20.5.19.5 255.255.255.0 ip ospf bfdend

R5#sh ip ospf neighbor | inc 51919.19.19.19       1   FULL/DR

00:00:39    20.5.19.19      FastEthernet0/0.519

I have no bfd neighbors

R5#sh bfd neighbors R5#

As well , am using GNS3 , when i tried to modify the BFD timers , The

routers stuck with no responseinterface FastEthernet0/0.519ip ospf bfdbfd

interval 250 min_rx 250 multiplier 3

Any ideas?Thanks

_______________________________________________

cisco-nsp mailing list  cisco-nsp at puck.nether.net

https://puck.nether.net/mailman/listinfo/cisco-nsp

archive at http://puck.nether.net/pipermail/cisco-nsp/



_______________________________________________

cisco-nsp mailing list  cisco-nsp at puck.nether.net

https://puck.nether.net/mailman/listinfo/cisco-nsp

archive at http://puck.nether.net/pipermail/cisco-nsp/