[c-nsp] Cisco BFD

[Blake Dunlap]

BFD is not supported in dynamips last I looked.

-Blake


On Tue, Nov 6, 2012 at 9:50 AM, Adam Vitkovsky <adam.vitkovsky at swan.sk>wrote:

> I came to conclusion that bfd doesn't work in dynamips it will always crash
>
>
> adam
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of M K
> Sent: Tuesday, November 06, 2012 2:43 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Cisco BFD
>
>
> Hi allI was trying to configure BFD with OSPF
>
> I have the below configuration R1#sh run int f0/0.519Building
> configuration...
> Current configuration : 112 bytes!interface FastEthernet0/0.519
> encapsulation dot1Q 519 ip address 20.5.19.19 255.255.255.0 ip ospf bfdend
> R5#sh run int f0/0.519Building configuration...
> Current configuration : 111 bytes!interface FastEthernet0/0.519
> encapsulation dot1Q 519 ip address 20.5.19.5 255.255.255.0 ip ospf bfdend
> R5#sh ip ospf neighbor | inc 51919.19.19.19       1   FULL/DR
> 00:00:39    20.5.19.19      FastEthernet0/0.519
> I have no bfd neighbors
> R5#sh bfd neighbors R5#
> As well , am using GNS3 , when i tried to modify the BFD timers , The
> routers stuck with no responseinterface FastEthernet0/0.519ip ospf bfdbfd
> interval 250 min_rx 250 multiplier 3
> Any ideas?Thanks
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>