[c-nsp] Cisco SUP-720 Issues

[Phil Mayers]

On 11/15/2012 08:25 PM, Craig Horchem wrote:
> I am having some issues with two SUP720's and can't find any record of
> any previous mention of something like this....
>

> 00:01:04: %SYS-6-BOOTTIME: Time taken to reboot after reload = 1211376
> seconds

Either this box has been powered off forever, or the battery on the sup 
is dead and the HW clock is out.

> *00:00:47: SP: tyfib_tcam_init: Unsupported board -- 0*

So it doesn't like something about the hardware, which is unsurprising 
given the next item...

> 00:00:51: SP: SP: Currently running ROMMON from S (Gold) region
> 00:01:03: %SYS-SP-5-RESTART: System restarted --
> Cisco Internetwork Operating System Software
> IOS (tm) s72033_sp Software (s72033_sp-SPV-M), Version 12.2(17d)SXB11a,
> RELEASE SOFTWARE (fc1)

That software release is *ancient*. Upgrade. Seriously.

> **00:01:12: SP: fabman: get IDPROM image error 3**
> **00:01:12: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 3,
> power not allowed:**
> **        C2PLUS module is not supported without SFM.**
> **00:01:12: %SM-SP-4-BADEVENT: Event 'c2plus_disallowed_power' is
> invalid for the current state

etc. etc. this all looks like you've got too-new modules in a chassis 
running ancient IOS. Upgrade it. Maybe it has lost the boot: string 
because the CMOS battery has died, and you were expecting newer firmware 
to load?