[c-nsp] Cisco SUP-720 Issues

[Craig Horchem]

I am having some issues with two SUP720's and can't find any record of 
any previous mention of something like this....

I put in bold the items that stand out.




00:00:44: curr is 0x0

00:00:44: RP: Currently running ROMMON from S (Gold) region
00:00:55: %SYS-5-CONFIG_I: Configured from memory by console
00:01:04: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) s72033_rp Software (s72033_rp-PK9SV-M), Version 
12.2(17d)SXB11a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Thu 13-Apr-06 04:50 by kehsiao
00:01:04: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a 
cold start
00:01:04: %SYS-6-BOOTTIME: Time taken to reboot after reload = 1211376 
seconds
*00:00:05: SP: fabman: get IDPROM image error 3*
00:00:05: %OIR-SP-6-CONSOLE: Changing console ownership to route processor




Firmware compiled 17-Mar-06 14:54 by integ Build [100]


*00:00:47: SP: tyfib_tcam_init: Unsupported board -- 0*
00:00:51: SP: SP: Currently running ROMMON from S (Gold) region
00:01:03: %SYS-SP-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) s72033_sp Software (s72033_sp-SPV-M), Version 12.2(17d)SXB11a, 
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Thu 13-Apr-06 04:53 by kehsiao
00:01:03: SP: fabman: get IDPROM image error 3
00:01:05: %OIR-SP-6-INSPS: Power supply inserted in slot 2
00:01:05: %C6KPWR-SP-4-PSOK: power supply 2 turned on.
00:01:07: %C6KENV-SP-4-FANHIOUTPUT: Version 2 high-output fan-tray is in 
effect
*00:01:07: SP: fabman: get IDPROM image error 3**
**00:01:07: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 2, 
power not allowed:**
**        C2PLUS module is not supported without SFM.**
**00:01:08: SP: fabman: get IDPROM image error 3**
**00:01:08: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 3, 
power not allowed:**
**        C2PLUS module is not supported without SFM.**
**00:01:12: SP: fabman: get IDPROM image error 3**
**00:01:12: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module 
in slot 5 became active.**
**00:01:12: SP: fabman: get IDPROM image error 3**
**00:01:12: SP: fabman: get IDPROM image error 3**
**00:01:12: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 2, 
power not allowed:**
**        C2PLUS module is not supported without SFM.**
**00:01:12: SP: fabman: get IDPROM image error 3**
**00:01:12: SP: fabman: get IDPROM image error 3**
**00:01:12: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 3, 
power not allowed:**
**        C2PLUS module is not supported without SFM.**
**00:01:12: %SM-SP-4-BADEVENT: Event 'c2plus_disallowed_power' is 
invalid for the current state 
'c2plus_enabled_with_no_legacy_and_fab_thr': fabman_lc_switching_mode LS:2**
**-Traceback= 4030D76C 4054FBB8 4053738C 40538824**
**00:01:12: SP: Last transition recorded: (c2plus_disallowed_power)-> 
c2plus_disabled_with_no_legacy_and_no_fab_thr (first_fab)-> 
c2plus_enabled_with_no_legacy_and_fab_thr**
**00:01:12: %SM-SP-4-BADEVENT: Event 'c2plus_disallowed_power' is 
invalid for the current state 
'c2plus_enabled_with_no_legacy_and_fab_thr': fabman_lc_switching_mode LS:3**
**-Traceback= 4030D76C 4054FBB8 4053738C 40538824**
**00:01:12: SP: Last transition recorded: (c2plus_disallowed_power)-> 
c2plus_disabled_with_no_legacy_and_no_fab_thr (first_fab)-> 
c2plus_enabled_with_no_legacy_and_fab_thr**
**00:01:12: %PM_SCP-SP-4-UNK_OPCODE: Received unknown unsolicited 
message from module 5, opcode 0x1204**
**00:01:12: %SCHED-SP-7-WATCH: Attempt to set uninitialized watched 
boolean (address 0).**
**-Process= "fabman_chnl_sync:fpoe 4", ipl= 0, pid= 209**
**-Traceback= 40130E90 40540FA4 405405A8 4054084C 405408FC*
Router>
Router>
Router>
Router>
Router>
Router>enable
Router#
Router#
Router#



Any ideas?