[c-nsp] 2960G upgrade to 150-2 no link on SFP?

[CiscoNSP_list CiscoNSP_list]

Hi Guys,

Upgraded a 2960G to c2960-lanbasek9-mz.150-2.SE.bin and now the single mode SFP wont link - Config is the same?
Other end of the fibre is a carrier switch, and they are seeing up/up:
Full-duplex, 1000Mb/s, link type is force-up, media type is 1000BaseLX SFP
We see down/down:
GigabitEthernet0/45 is down, line protocol is down (notconnect) 
  Hardware is Gigabit Ethernet, address is 0024.c3f0.912d (bia 0024.c3f0.912d)

  Description: GIGE_ICAP_INTERNETCONNECT

  MTU 1998 bytes, BW 10000 Kbit/sec, DLY 1000 usec, 

     reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation ARPA, loopback not set

  Keepalive not set

  Auto-duplex, Auto-speed, link type is auto, media type is 1000BaseLX SFP