[c-nsp] 15.1SY & draft-rosen MVPN

[Arie Vayner (avayner)]

The command should be under the IPv4 address family...

Router(config)#vrf definition test

Router(config-vrf)#address-family ipv4
Router(config-vrf-af)#md
Router(config-vrf-af)#mdt ?
  data        MDT data trees
  default     The default group
  log-reuse   Event logging for data MDT reuse
  overlay     MDT Overlay Protocol
  preference  MDT preference (default pim mldp)


Arie

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Phil Mayers
Sent: Monday, November 19, 2012 14:50
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] 15.1SY & draft-rosen MVPN

It's late and I'm tired, so maybe I'm missing something, but after a reload into 15.1SY, our testing sup270 failed to take the "mdt" commands under VRFs:

  mdt default 239.254.1.2
   ^
% Invalid input detected at '^' marker.

The VRFs are all "new" format "vrf definition" if that matters, but an old-style "ip vrf" object doesn't take the command either.

There's a bunch of stuff in the config guide about mLDP-based MVPNs and some new "l3vpn encap" command stuff:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/15.1SY/config_guide/sup720/ipv4_multicast_vpn.html

Any ideas anyone? Bug?

Cheers,
Phil
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/