[c-nsp] 6vpe - me3600x

[Jason Lixfeld]

I've relegated it to a maintenance window.

On 2012-10-02, at 9:53 AM, "Aaron" <aaron1 at gvtc.com> wrote:

> When I enabled vpnv6 on my pre-existing vpnv4 neighbor session I saw it
> bounce....Is there any way around this ?  ...i'm concerned about the
> interruption (for operational environment) on the underlying vpnv4 l3vpn.
> Would be only momentary though right?... looks like 10 seconds from
> "nbr_reset" to "Up"
> 
> If no way to avoid this, how do y'all do it ?  maint window?
> 
> Aaron
> 
> noc-3600(config)#router bgp 64512
> noc-3600(config-router)#address-family vpnv6 unicast
> % IPv6 routing not enabled
> noc-3600(config)#ipv unicast-routing
> noc-3600(config)#router bgp 64512
> noc-3600(config-router)#address-family vpnv6 unicast
> noc-3600(config-router-af)#neighbor 10.101.0.254 activate
> 
> *Oct  1 21:01:46: %BGP-5-NBR_RESET: Neighbor 10.101.0.254 reset (Capability
> changed)
> *Oct  1 21:01:46: %BGP-5-ADJCHANGE: neighbor 10.101.0.254 Down Capability
> changed
> *Oct  1 21:01:46: %BGP_SESSION-5-ADJCHANGE: neighbor 10.101.0.254 VPNv4
> Unicast topology base removed from session  Capability changed
> *Oct  1 21:01:47: %BGP-5-NBR_RESET: Neighbor 10.101.0.254 active reset (Peer
> closed the session)
> *Oct  1 21:01:47: %BGP_SESSION-5-ADJCHANGE: neighbor 10.101.0.254 VPNv6
> Unicast topology base removed from session  Peer closed the session
> *Oct  1 21:01:47: %BGP_SESSION-5-ADJCHANGE: neighbor 10.101.0.254 VPNv4
> Unicast topology base removed from session  Peer closed the session
> *Oct  1 21:01:56: %BGP-5-ADJCHANGE: neighbor 10.101.0.254 Up
> 
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/