[c-nsp] 6vpe - me3600x

Aaron aaron1 at gvtc.com
Tue Oct 2 10:01:33 EDT 2012


(resending due to ugly formatting)

When I enabled vpnv6 on my pre-existing vpnv4 neighbor session I saw it
bounce....Is there any way around this ?  ...i'm concerned about the
interruption (for operational environment) on the underlying vpnv4 l3vpn.
Would be only momentary though right?... looks like 10 seconds from
"nbr_reset" to "Up"

If no way to avoid this, how do y'all do it ?  maint window?

Aaron

noc-3600(config)#router bgp 64512

noc-3600(config-router)#address-family vpnv6 unicast

 % IPv6 routing not enabled

 noc-3600(config)#ipv unicast-routing

 noc-3600(config)#router bgp 64512

 noc-3600(config-router)#address-family vpnv6 unicast

 noc-3600(config-router-af)#neighbor 10.101.0.254 activate

*Oct  1 21:01:46: %BGP-5-NBR_RESET: Neighbor 10.101.0.254 reset
(Capabilitychanged)

*Oct  1 21:01:46: %BGP-5-ADJCHANGE: neighbor 10.101.0.254 Down Capability
changed

 *Oct  1 21:01:46: %BGP_SESSION-5-ADJCHANGE: neighbor 10.101.0.254 VPNv4
Unicast topology base removed from session  Capability changed

 *Oct  1 21:01:47: %BGP-5-NBR_RESET: Neighbor 10.101.0.254 active reset
(Peer closed the session)

 *Oct  1 21:01:47: %BGP_SESSION-5-ADJCHANGE: neighbor 10.101.0.254 VPNv6
Unicast topology base removed from session  Peer closed the session

 *Oct  1 21:01:47: %BGP_SESSION-5-ADJCHANGE: neighbor 10.101.0.254 VPNv4
Unicast topology base removed from session  Peer closed the session

 *Oct  1 21:01:56: %BGP-5-ADJCHANGE: neighbor 10.101.0.254 Up





More information about the cisco-nsp mailing list