[c-nsp] NAt on cisco ASA 5505

[Jason Baugher]

It's possible and necessary when configuring a tunnel between two 
networks with overlapping rfc1918 space. Use an ACL to identify the 
traffic, and corresponding nat and global statements to NAT the traffic 
on the outside interface. The tunnel is then configured with the nat'd IP's.

Jason

On 10/15/2012 4:50 AM, Olivier CALVANO wrote:
> Hi
>
> i want nat on a cisco asa 5505 (ipsec tunnel site to site) :
>
>
> 192.168.10.0/24 in 192.168.235.0/24
>
> it's possible ?
>
> all request from 192.168.10.0 to a IP into the ipsec tunnel are
> changer in 192.168.235.x
>
> thanks for your help
>
> olivier
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>