[c-nsp] Multicast packets dropping at 6509

[Matthew Huff]

Couple of things:

1) What is the TTL set on the packets? If it is set to 1, it won't cross a L3 boundry.
2) On the Layer 3 switches, what are the multicast settings on the L3 interfaces (pim sparse, pim dense, etc...)


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Phil Mayers
Sent: Monday, October 29, 2012 6:46 AM
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Multicast packets dropping at 6509

On 10/29/2012 10:18 AM, Ambedkar wrote:
> Hi,
> I am facing a problem in multicast..
> The scenario is like this, 2 layer-2 switches(2950) and 1 Layer-1
> switch(cisco 6509).
> These three switches are connected in series, L2-L3-L2. The problem is the
> packets are dropping at L3(Cisco 6509) switch using catOS. The multicast
> data is flowing in SAME vlan, means eventhough L3 is there in between, the
> data is flowing at layer-2 only.

How many bits/packets per second?

What linecards are you using?
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/