[c-nsp] Cisco 7609-S - ME3600 / xconnect up - ac down
Antonis Vosdoganis
avosdo at gmail.com
Mon Apr 8 09:51:06 EDT 2013
Hello
We are trying to set up a pseudowire connection between a Cisco 7609-S and
ME3600.
When xconnect is applied on physical interface or service instance there is
no problem.
When we are moving to interface vlan xconnect is up but ac is down.
Cisco 7609 is using a 7600-ES+20G3CXL gigabit port NOT RSP720 and IOS
version c7600rsp72043-advipservicesk9-mz.153-1.S.bin
ME3600 is using IOS version me360x-universalk9-mz.153-1.S1.bin
We have successfully set up the same scenario with 2 ME3600.
Please check attached files for sample configurations and show - debugs
commands.
Regards
Antonis.
-------------- next part --------------
ME3600#show mpls l2transport binding 20
Destination Address: 172.16.0.1,VC ID: 20
Local Label: 17
Cbit: 1, VC Type: Ethernet, GroupID: 0
MTU: 1500, Interface Desc: n/a
VCCV: CC Type: CW [1], RA [2]
CV Type: LSPV [2], BFD/Raw [5]
Remote Label: 125
Cbit: 1, VC Type: Ethernet, GroupID: 0
MTU: 1500, Interface Desc: n/a
VCCV: CC Type: CW [1], RA [2], TTL [3]
CV Type: LSPV [2], BFD/Raw [5]
7609-S#show mpls l2transport binding 20
Destination Address: 172.18.0.17,VC ID: 20
Local Label: 125
Cbit: 1, VC Type: Ethernet, GroupID: 0
MTU: 1500, Interface Desc: n/a
VCCV: CC Type: CW [1], RA [2], TTL [3]
CV Type: LSPV [2], BFD/Raw [5]
Remote Label: 17
Cbit: 1, VC Type: Ethernet, GroupID: 0
MTU: 1500, Interface Desc: n/a
VCCV: CC Type: CW [1], RA [2]
CV Type: LSPV [2], BFD/Raw [5]
7609-S#debug mpls l2transport signaling message detail
AToM LDP message detail debugging is on
Apr 8 12:17:47.284: %LDP-5-NBRCHG: LDP Neighbor 172.18.0.17:0 (1) is UP
Apr 8 12:17:47.296: AToM LDP[172.18.0.17]: Sending label mapping msg
Apr 8 12:17:47.296: AToM LDP[172.18.0.17]: VC Type 5, c-bit, mtu 1500
Apr 8 12:17:47.296: AToM LDP[172.18.0.17]: VC ID 20, label 125
Apr 8 12:17:47.296: AToM LDP[172.18.0.17]: Group 0
Apr 8 12:17:47.296: AToM LDP[172.18.0.17]: Status 0x28 [PW Status]
Apr 8 12:17:47.296: AToM LDP[172.18.0.17]: PW Status 0x0(0x1) [UP]
Apr 8 12:17:47.296: AToM LDP[172.18.0.17]: Received label mapping msg, id 62179, GR instance 1
Apr 8 12:17:47.296: AToM LDP[172.18.0.17]: VC Type 5, c-bit, mtu 1500
Apr 8 12:17:47.296: AToM LDP[172.18.0.17]: VC ID 20, label 129
7609-S#
Apr 8 12:17:47.296: AToM LDP[172.18.0.17]: Group 0
Apr 8 12:17:47.296: AToM LDP[172.18.0.17]: Status 0x28 [PW Status]
Apr 8 12:17:47.296: AToM LDP[172.18.0.17]: PW Status 0x0(0x1) [UP]
Apr 8 12:17:47.400: AToM LDP[172.18.0.17]: Sending notif msg
Apr 8 12:17:47.400: AToM LDP[172.18.0.17]: VC Type 5, c-bit, mtu 1500
Apr 8 12:17:47.400: AToM LDP[172.18.0.17]: VC ID 20, label 125
Apr 8 12:17:47.400: AToM LDP[172.18.0.17]: Group 0
Apr 8 12:17:47.400: AToM LDP[172.18.0.17]: Status 0x28 [PW Status]
Apr 8 12:17:47.400: AToM LDP[172.18.0.17]: PW Status 0x6(0xC) [DOWN AC(rx/tx faults)]
7609-S#
Apr 8 12:18:02.407: AToM LDP[172.18.0.17]: Sending notif msg
Apr 8 12:18:02.407: AToM LDP[172.18.0.17]: VC Type 5, c-bit, mtu 1500
Apr 8 12:18:02.407: AToM LDP[172.18.0.17]: VC ID 20, label 125
Apr 8 12:18:02.407: AToM LDP[172.18.0.17]: Group 0
Apr 8 12:18:02.407: AToM LDP[172.18.0.17]: Status 0x28 [PW Status]
Apr 8 12:18:02.407: AToM LDP[172.18.0.17]: PW Status 0x0(0x1) [UP]
Apr 8 12:18:02.515: AToM LDP[172.18.0.17]: Sending notif msg
Apr 8 12:18:02.515: AToM LDP[172.18.0.17]: VC Type 5, c-bit, mtu 1500
Apr 8 12:18:02.515: AToM LDP[172.18.0.17]: VC ID 20, label 125
Apr 8 12:18:02.515: AToM LDP[172.18.0.17]: Group 0
7609-S#
Apr 8 12:18:02.515: AToM LDP[172.18.0.17]: Status 0x28 [PW Status]
Apr 8 12:18:02.515: AToM LDP[172.18.0.17]: PW Status 0x6(0xC) [DOWN AC(rx/tx faults)]
7609-S#
Apr 8 12:18:17.523: AToM LDP[172.18.0.17]: Sending notif msg
Apr 8 12:18:17.523: AToM LDP[172.18.0.17]: VC Type 5, c-bit, mtu 1500
Apr 8 12:18:17.523: AToM LDP[172.18.0.17]: VC ID 20, label 125
Apr 8 12:18:17.523: AToM LDP[172.18.0.17]: Group 0
Apr 8 12:18:17.523: AToM LDP[172.18.0.17]: Status 0x28 [PW Status]
Apr 8 12:18:17.523: AToM LDP[172.18.0.17]: PW Status 0x0(0x1) [UP]
Apr 8 12:18:17.627: AToM LDP[172.18.0.17]: Sending notif msg
Apr 8 12:18:17.627: AToM LDP[172.18.0.17]: VC Type 5, c-bit, mtu 1500
Apr 8 12:18:17.627: AToM LDP[172.18.0.17]: VC ID 20, label 125
Apr 8 12:18:17.627: AToM LDP[172.18.0.17]: Group 0
7609-S#
Apr 8 12:18:17.627: AToM LDP[172.18.0.17]: Status 0x28 [PW Status]
Apr 8 12:18:17.627: AToM LDP[172.18.0.17]: PW Status 0x6(0xC) [DOWN AC(rx/tx faults)]
7609-S#debug acircuit event
Attachment Circuit events debugging is on
7609-S#debug acircuit error
Attachment Circuit errors debugging is on
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: Retry circuit setup
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: .. Features not supported
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: . Pri: Retry setup switching
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: .. Pri: Setup switching
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: ... Notify AC of remote status, DOWN
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: ... i/f 34 peer seg type AToM, switch type: AC to ATOM
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: ... i/w Eth plat-idx 80148003 if-num 33 peer-vlan 0
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: ... outer 20 inner 0 etype 8100 .1qAny 0
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: ... encap len 4
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: ... Pri: Setup switching, UP, sw 6272
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: .... Pri: Completed switching, sw 6272 seg 6435, segment type 3
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: .... Set flags: None -> DpUp[0x40]
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: .... i/f 34 peer seg type AToM, switch type: AC to ATOM
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: .... Notify AC of remote status, UP
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: .. Complete circuit setup
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: ... State Provisioning->Idle
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: ... Received remote status, UP in Idle
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: .... State Idle->Dn-Rem-Connecting
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: ... Circuit up notification
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: .... Circuit retry
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: ..... if-up handler, inform ACMgr
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: ...... State Dn-Rem-Connecting->Connected
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: ...... Pri: Update seg 6435, UP
Apr 8 12:21:37.158: AC: Retry queue, processed 1 entries, no remaining entries
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: Receive <Circuit Status> msg
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: Circuit attributes, P2P to VPWS:
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: Status: UP (0x1)
Apr 8 12:21:37.158: AC VLAN[Vl20, 20]: Alarm: 0x0
Apr 8 12:21:37.266: AC VLAN[Vl20, 20]: Pri: switching down event, tearing down circuit
Apr 8 12:21:37.266: AC VLAN[Vl20, 20]: . Pri: Deallocate seg 6435
Apr 8 12:21:37.266: AC VLAN[Vl20, 20]: .. i/f 34 peer seg type AToM, switch type: AC to ATOM
Apr 8 12:21:37.266: AC VLAN[Vl20, 20]: .. Clr flags: DpUp -> None[0x0]
Apr 8 12:21:37.266: AC VLAN[Vl20, 20]: . IDB down
Apr 8 12:21:37.266: AC VLAN[Vl20, 20]: .. State Connected->Dn-Rem-Connecting
Apr 8 12:21:37.266: AC VLAN[Vl20, 20]: .. Pri: Update seg 0, DOWN
7609-S#
Apr 8 12:21:37.266: AC VLAN[Vl20, 20]: . State Dn-Rem-Connecting->Provisioning
Apr 8 12:21:37.266: AC VLAN[Vl20, 20]: . Pri: Add to retry queue
Apr 8 12:21:37.266: AC: Added circuit to retry queue, type 5, id 20, idb Vl20
Apr 8 12:21:37.266: AC VLAN[Vl20, 20]: Receive <Circuit Status> msg
Apr 8 12:21:37.266: AC VLAN[Vl20, 20]: Circuit attributes, P2P to VPWS:
Apr 8 12:21:37.266: AC VLAN[Vl20, 20]: Status: DOWN AC(rx/tx faults) (0xC)
Apr 8 12:21:37.266: AC VLAN[Vl20, 20]: Alarm: 0x0
7609-S#debug xconnect error
Xconnect author errors debugging is on
7609-S#debug xconnect event
Xconnect author events debugging is on
Apr 8 12:24:09.473: XC VPWS[3900001A:Vl20:20]: Update, i/f 34
Apr 8 12:24:09.473: XC VPWS[3900001A:Vl20:20]: Circuit attributes from client:
Apr 8 12:24:09.473: XC VPWS[3900001A:Vl20:20]: Status: UP (0x1)
Apr 8 12:24:09.473: XC VPWS[3900001A:Vl20:20]: Alarm: 0x0
Apr 8 12:24:09.473: XC VPWS[3900001A:Vl20:20]: Received status change, status is UP
Apr 8 12:24:09.473: XC VPWS[3900001A:172.18.0.17:20]: Circuit attributes to client:
Apr 8 12:24:09.473: XC VPWS[3900001A:172.18.0.17:20]: Status: UP (0x1)
Apr 8 12:24:09.473: XC VPWS[3900001A:172.18.0.17:20]: Alarm: 0x0
Apr 8 12:24:09.473: XC: MPLS peer 172.18.0.17 vcid 20, VC state UP
Apr 8 12:24:09.473: [172.18.0.17, 20]: Notifying PWMIB that xconnect segment is UP
Apr 8 12:24:09.580: XC VPWS[3900001A:Vl20:20]: Update, i/f 34
Apr 8 12:24:09.580: XC VPWS[3900001A:Vl20:20]: Circuit attributes from client:
Apr 8 12:24:09.580: XC VPWS[3900001A:Vl20:20]: Status: DOWN AC(rx/tx faults) (0xC)
Apr 8 12:24:09.580: XC VPWS[3900001A:Vl20:20]: Alarm: 0x0
Apr 8 12:24:09.580: XC VPWS[3900001A:Vl20:20]: Received status change, status is DOWN AC(rx/tx faults)
Apr 8 12:24:09.580: XC VPWS[3900001A:172.18.0.17:20]: Circuit attributes to client:
Apr 8 12:24:09.580: XC VPWS[3900001A:172.18.0.17:20]: Status: DOWN AC(rx/tx faults) (0xC)
7609-S#
Apr 8 12:24:09.580: XC VPWS[3900001A:172.18.0.17:20]: Alarm: 0x0
Apr 8 12:24:09.580: XC: MPLS peer 172.18.0.17 vcid 20, VC state DOWN, Loc AC Err
Apr 8 12:24:09.580: [172.18.0.17, 20]: Notifying PWMIB that xconnect segment is DOWN
7609-S#
Apr 8 12:24:24.573: XC VPWS[3900001A:Vl20:20]: Update, i/f 34
Apr 8 12:24:24.573: XC VPWS[3900001A:Vl20:20]: Circuit attributes from client:
Apr 8 12:24:24.573: XC VPWS[3900001A:Vl20:20]: Status: UP (0x1)
Apr 8 12:24:24.573: XC VPWS[3900001A:Vl20:20]: Alarm: 0x0
Apr 8 12:24:24.573: XC VPWS[3900001A:Vl20:20]: Received status change, status is UP
Apr 8 12:24:24.573: XC VPWS[3900001A:172.18.0.17:20]: Circuit attributes to client:
Apr 8 12:24:24.573: XC VPWS[3900001A:172.18.0.17:20]: Status: UP (0x1)
Apr 8 12:24:24.573: XC VPWS[3900001A:172.18.0.17:20]: Alarm: 0x0
Apr 8 12:24:24.573: XC: MPLS peer 172.18.0.17 vcid 20, VC state UP
Apr 8 12:24:24.573: [172.18.0.17, 20]: Notifying PWMIB that xconnect segment is UP
Apr 8 12:24:24.681: XC VPWS[3900001A:Vl20:20]: Update, i/f 34
Apr 8 12:24:24.681: XC VPWS[3900001A:Vl20:20]: Circuit attributes from client:
Apr 8 12:24:24.681: XC VPWS[3900001A:Vl20:20]: Status: DOWN AC(rx/tx faults) (0xC)
Apr 8 12:24:24.681: XC VPWS[3900001A:Vl20:20]: Alarm: 0x0
Apr 8 12:24:24.681: XC VPWS[3900001A:Vl20:20]: Received status change, status is DOWN AC(rx/tx faults)
Apr 8 12:24:24.681: XC VPWS[3900001A:172.18.0.17:20]: Circuit attributes to client:
Apr 8 12:24:24.681: XC VPWS[3900001A:172.18.0.17:20]: Status: DOWN AC(rx/tx faults) (0xC)
7609-S#
Apr 8 12:24:24.681: XC VPWS[3900001A:172.18.0.17:20]: Alarm: 0x0
Apr 8 12:24:24.681: XC: MPLS peer 172.18.0.17 vcid 20, VC state DOWN, Loc AC Err
Apr 8 12:24:24.681: [172.18.0.17, 20]: Notifying PWMIB that xconnect segment is DOWN
-------------- next part --------------
CISCO 7609-S
interface GigabitEthernet1/18
description TEST_MPLS_PSEUDOWIRE
no ip address
load-interval 30
speed 1000
no keepalive
no cdp enable
service instance 20 ethernet
encapsulation untagged
xconnect 172.18.0.17 20 encapsulation mpls
7609-S#show mpls l2transport vc 20
Local intf Local circuit Dest address VC ID Status
------------- -------------------------- --------------- ---------- ----------
Gi1/18 Ethernet:20 172.18.0.17 20 UP
7609-S#show mpls l2transport vc 20 detail
Local interface: Gi1/18 up, line protocol up, Ethernet:20 up
Destination address: 172.18.0.17, VC ID: 20, VC status: up
Output interface: Vl3019, imposed label stack {99 17}
Preferred path: not configured
Default path: active
Next hop: 172.16.1.27
Create time: 00:00:48, last status change time: 00:00:48
Last label FSM state change time: 00:00:48
Signaling protocol: LDP, peer 172.18.0.17:0 up
Targeted Hello: 172.16.0.1(LDP Id) -> 172.18.0.17, LDP is UP
Status TLV support (local/remote) : enabled/supported
LDP route watch : enabled
Label/status state machine : established, LruRru
Last local dataplane status rcvd: No fault
Last BFD dataplane status rcvd: Not sent
Last BFD peer monitor status rcvd: No fault
Last local AC circuit status rcvd: No fault
Last local AC circuit status sent: No fault
Last local PW i/f circ status rcvd: No fault
Last local LDP TLV status sent: No fault
Last remote LDP TLV status rcvd: No fault
Last remote LDP ADJ status rcvd: No fault
MPLS VC labels: local 118, remote 17
Group ID: local 0, remote 0
MTU: local 1500, remote 1500
Remote interface description:
Sequencing: receive disabled, send disabled
Control Word: On (configured: autosense)
SSO Descriptor: 172.18.0.17/20, local label: 118
Dataplane:
SSM segment/switch IDs: 6270/6269 (used), PWID: 9
VC statistics:
transit packet totals: receive 0, send 5
transit byte totals: receive 0, send 370
transit packet drops: receive 0, seq error 0, send 0
7609-S#show mpls forwarding-table
Local Outgoing Prefix Bytes Label Outgoing Next Hop
Label Label or Tunnel Id Switched interface
118 No Label l2ckt(9) 254 Gi1/18 point2point
ME3600
interface GigabitEthernet0/23
switchport trunk allowed vlan none
switchport mode trunk
service instance 20 ethernet
encapsulation untagged
bridge-domain 20
interface Vlan20
no ip address
xconnect 172.16.0.1 20 encapsulation mpls
ME3600#show mpls l2transport vc 20
Local intf Local circuit Dest address VC ID Status
------------- -------------------------- --------------- ---------- ----------
Vl20 Eth VLAN 20 172.16.0.1 20 UP
ME3600#show mpls l2transport vc 20 detail
Local interface: Vl20 up, line protocol up, Eth VLAN 20 up
Interworking type is Ethernet
Destination address: 172.16.0.1, VC ID: 20, VC status: up
Output interface: Vl4000, imposed label stack {77 118}
Preferred path: not configured
Default path: active
Next hop: 172.18.1.36
Create time: 00:50:33, last status change time: 00:07:53
Last label FSM state change time: 00:07:53
Signaling protocol: LDP, peer 172.16.0.1:0 up
Targeted Hello: 172.18.0.17(LDP Id) -> 172.16.0.1, LDP is UP
Status TLV support (local/remote) : enabled/supported
LDP route watch : enabled
Label/status state machine : established, LruRru
Last local dataplane status rcvd: No fault
Last BFD dataplane status rcvd: Not sent
Last BFD peer monitor status rcvd: No fault
Last local AC circuit status rcvd: No fault
Last local AC circuit status sent: No fault
Last local PW i/f circ status rcvd: No fault
Last local LDP TLV status sent: No fault
Last remote LDP TLV status rcvd: No fault
Last remote LDP ADJ status rcvd: No fault
MPLS VC labels: local 17, remote 118
Group ID: local 0, remote 0
MTU: local 1500, remote 1500
Remote interface description: TEST_MPLS_PSEUDOWIRE
Sequencing: receive disabled, send disabled
Control Word: On (configured: autosense)
Dataplane:
SSM segment/switch IDs: 12507/8405 (used), PWID: 14
VC statistics:
transit packet totals: receive 71, send 6
transit byte totals: receive 9378, send 1542
transit packet drops: receive 0, seq error 0, send 0
-------------- next part --------------
7609-S
Apr 8 11:39:39.848: %LDP-5-NBRCHG: LDP Neighbor 172.18.0.17:0 (1) is UP
ME3600
Apr 8 11:39:40.320: %LDP-5-NBRCHG: LDP Neighbor 172.16.0.1:0 (3) is UP
7609-S
interface GigabitEthernet1/18
description TEST_MPLS_PSEUDOWIRE
no ip address
load-interval 30
speed 1000
no keepalive
no cdp enable
service instance 20 ethernet
encapsulation untagged
bridge-domain 20
interface Vlan20
no ip address
xconnect 172.18.0.17 20 encapsulation mpls
7609-S#show mpls l2transport vc 20
Local intf Local circuit Dest address VC ID Status
------------- -------------------------- --------------- ---------- ----------
Vl20 Eth VLAN 20 172.18.0.17 20 DOWN
7609-S#show mpls l2transport vc 20 detail
Local interface: Vl20 up, line protocol up, Eth VLAN 20 down
Interworking type is Ethernet
Destination address: 172.18.0.17, VC ID: 20, VC status: down
Last error: Local peer access circuit is down
Output interface: none, imposed label stack {}
Preferred path: not configured
Default path: active
No adjacency
Create time: 00:56:08, last status change time: 00:00:01
Last label FSM state change time: 00:18:02
Signaling protocol: LDP, peer 172.18.0.17:0 up
Targeted Hello: 172.16.0.1(LDP Id) -> 172.18.0.17, LDP is UP
Status TLV support (local/remote) : enabled/supported
LDP route watch : enabled
Label/status state machine : established, LrdRru
Last local dataplane status rcvd: No fault
Last BFD dataplane status rcvd: Not sent
Last BFD peer monitor status rcvd: No fault
Last local AC circuit status rcvd: DOWN AC(rx/tx faults)
Last local AC circuit status sent: No fault
Last local PW i/f circ status rcvd: No fault
Last local LDP TLV status sent: DOWN AC(rx/tx faults)
Last remote LDP TLV status rcvd: No fault
Last remote LDP ADJ status rcvd: No fault
MPLS VC labels: local 125, remote 129
Group ID: local 0, remote 0
MTU: local 1500, remote 1500
Remote interface description:
Sequencing: receive disabled, send disabled
Control Word: On (configured: autosense)
SSO Descriptor: 172.18.0.17/20, local label: 125
Dataplane:
SSM segment/switch IDs: 10516/6272 (used), PWID: 9
VC statistics:
transit packet totals: receive 3, send 0
transit byte totals: receive 762, send 0
transit packet drops: receive 0, seq error 0, send 0
ME3600
interface GigabitEthernet0/23
switchport trunk allowed vlan none
switchport mode trunk
service instance 20 ethernet
encapsulation untagged
bridge-domain 20
interface Vlan20
no ip address
xconnect 172.16.0.1 20 encapsulation mpls
ME3600#show mpls l2transport vc 20
Local intf Local circuit Dest address VC ID Status
------------- -------------------------- --------------- ---------- ----------
Vl20 Eth VLAN 20 172.16.0.1 20 DOWN
ME3600#show mpls l2transport vc 20 detail
Local interface: Vl20 up, line protocol up, Eth VLAN 20 up
Interworking type is Ethernet
Destination address: 172.16.0.1, VC ID: 20, VC status: down
Last error: Remote peer access circuit is down
Output interface: Vl4000, imposed label stack {77 125}
Preferred path: not configured
Default path: active
Next hop: 172.18.1.36
Create time: 00:55:02, last status change time: 00:00:09
Last label FSM state change time: 00:02:43
Signaling protocol: LDP, peer 172.16.0.1:0 up
Targeted Hello: 172.18.0.17(LDP Id) -> 172.16.0.1, LDP is UP
Status TLV support (local/remote) : enabled/supported
LDP route watch : enabled
Label/status state machine : established, LruRrd
Last local dataplane status rcvd: No fault
Last BFD dataplane status rcvd: Not sent
Last BFD peer monitor status rcvd: No fault
Last local AC circuit status rcvd: No fault
Last local AC circuit status sent: DOWN AC(rx/tx faults)
Last local PW i/f circ status rcvd: No fault
Last local LDP TLV status sent: No fault
Last remote LDP TLV status rcvd: DOWN AC(rx/tx faults)
Last remote LDP ADJ status rcvd: No fault
MPLS VC labels: local 17, remote 125
Group ID: local 0, remote 0
MTU: local 1500, remote 1500
Remote interface description:
Sequencing: receive disabled, send disabled
Control Word: On (configured: autosense)
Dataplane:
SSM segment/switch IDs: 12508/8405 (used), PWID: 14
VC statistics:
transit packet totals: receive 1, send 7
transit byte totals: receive 90, send 1802
transit packet drops: receive 0, seq error 0, send 0
More information about the cisco-nsp
mailing list