[c-nsp] Cisco 7609-S - ME3600 / xconnect up - ac down

George Giannousopoulos ggiannou at gmail.com
Mon Apr 8 11:23:20 EDT 2013


Hello,

Are the two devices connected back to back?
In order to use SVI based EoMPLS from 7600 to me3600x, you need the egress
interface on the 7600 towards the me3600x to be on a ES+ module AND it must
be configured as L3 ptp.

Is that your case?

George


On Mon, Apr 8, 2013 at 4:51 PM, Antonis Vosdoganis <avosdo at gmail.com> wrote:

> Hello
>
>  We are trying to set up a pseudowire connection between a Cisco 7609-S and
> ME3600.
>
> When xconnect is applied on physical interface or service instance there is
> no problem.
>
> When we are moving to interface vlan xconnect is up but ac is down.
>
> Cisco 7609 is using a 7600-ES+20G3CXL gigabit port NOT RSP720 and IOS
> version c7600rsp72043-advipservicesk9-mz.153-1.S.bin
>
> ME3600 is using IOS version me360x-universalk9-mz.153-1.S1.bin
>
> We have successfully set up the same scenario with 2 ME3600.
>
> Please check attached files for sample configurations and show - debugs
> commands.
>
>  Regards
>
>  Antonis.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


More information about the cisco-nsp mailing list