[c-nsp] Way to get 3rd party optics to work in UCS/FEX?

Gordon Smith gordon at gswsystems.com
Thu Apr 11 21:37:27 EDT 2013

 Have you tried this?

 int x.x
  switchport mode fex-fabric


 On Thu, 11 Apr 2013 20:46:00 -0400, David Hubbard wrote:
> I've got two 6120XP's and lots of left over Avago 10gig SFP's
> from an EMC deployment where too many were purchased.  I
> tried to install a couple in our 6120's and it of course
> reports "SFP validation failed" and admin state "Disabled"
> as a result.
> Any undocumented command to get them to work?  They of course
> work just fine in our Brocade switches, and the EMC equipment.
> Thanks,
> David
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

More information about the cisco-nsp mailing list