[c-nsp] Way to get 3rd party optics to work in UCS/FEX?
Aaron
aaron1 at gvtc.com
Fri Apr 12 12:05:22 EDT 2013
Are you talking about sfp/xfp 3rd party support in NXOS? If so, would this
limitation apply to Cisco 5548UP as well ? Asking since I'm considering
buying some of those and want to know what I'm getting myself into.
Aaron
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of David Hubbard
Sent: Friday, April 12, 2013 10:28 AM
To: Cisco Network Service Providers
Subject: Re: [c-nsp] Way to get 3rd party optics to work in UCS/FEX?
Unfortunately NXOS on the UCS fabric interconnects is apparently limited to
read only mode (according to TAC); any changes have to go through the web
interface and they've intentionally disabled any option of using unsupported
transceivers.
Back to the drawing board,
David
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Maarten Carels
> Sent: Friday, April 12, 2013 10:21 AM
> To: Cisco Network Service Providers
> Subject: Re: [c-nsp] Way to get 3rd party optics to work in UCS/FEX?
>
> On 12 Apr 2013, at 16:09 , David Hubbard wrote:
>
> > Ah, that got me close but unfortunately the command isn't there:
> >
> > fab1-A(nxos)# service unsupported-transceiver
> > ^
> > % Invalid command at '^' marker.
> >
> > Maybe it would show up if I upgrade? It's been about a year;
> > currently running 2.02q:
>
>
> In configuration mode?
>
> --maarten
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list