[c-nsp] ASR9k/IOS-XR BNG for IPoE (DHCP) help

Smail Milak smail.milak at gmail.com
Fri Aug 2 07:08:40 EDT 2013


Please try using ipv4 unnumbered Loopback X under the subscriber interface.
Also add ipv4 point-to-point.
Under the dynamic template add ipv4 unnumbered Loopback X.

Your config should look like this:

inter loopback 10064
 ipv4 100.64.248.129 255.255.255.192


interface Bundle-Ether1.3121
 ipv4 point-to-point
ipv4 unnumbered loopback 10064

dynamic-template 
type ipsubscriber IPSUB_TPL
 ipv4 unnumbered loopback 10064


-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Nick
Hilliard
Sent: Friday, August 02, 2013 12:53 PM
To: Olga
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Cisco ASR1002 software images in the wild

On 02/08/2013 11:29, Olga wrote:
> Correct me if i'm wrong

It's more complicated than this on the asr1000 platform.  See the archive
for more details.

Nick

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/



More information about the cisco-nsp mailing list