[c-nsp] Nexu 5020 HSRP issues

[Christian Kildau]

I'm sorry, please ignore the last message, Type-2 consistency status was
due to some testing:
Heres the correct vpc status:

Legend:
                (*) - local vPC is down, forwarding via vPC peer-link

vPC domain id                     : 1
Peer status                       : peer adjacency formed ok
vPC keep-alive status             : peer is alive
Configuration consistency status  : success
Per-vlan consistency status       : success
Type-2 consistency status         : success
vPC role                          : secondary, operational primary
Number of vPCs configured         : 2
Peer Gateway                      : Enabled
Peer gateway excluded VLANs     : -
Dual-active excluded VLANs        : -
Graceful Consistency Check        : Enabled
Auto-recovery status              : Enabled (timeout = 240 seconds)

vPC Peer-link status
---------------------------------------------------------------------
id   Port   Status Active vlans
--   ----   ------ --------------------------------------------------
1    Po1    up     1,200-202,2810

vPC status
----------------------------------------------------------------------------
id     Port        Status Consistency Reason                     Active
vlans
------ ----------- ------ ----------- -------------------------- -----------
1      Po2         up     success     success                    200
2      Po3         up     success     success                    200


On Fri, Aug 9, 2013 at 5:57 PM, Christian Kildau <lists at unixhosts.org>wrote:

> Yes, vlan200 goes trough vpc peer-link:
>
> # show vpc
> Legend:
>                 (*) - local vPC is down, forwarding via vPC peer-link
>
> vPC domain id                     : 1
> Peer status                       : peer adjacency formed ok
> vPC keep-alive status             : peer is alive
> Configuration consistency status  : success
> Per-vlan consistency status       : success
> Type-2 consistency status         : failed
> Type-2 inconsistency reason       : VTP type-2 configuration incompatible
> vPC role                          : secondary, operational primary
> Number of vPCs configured         : 2
> Peer Gateway                      : Enabled
> Peer gateway excluded VLANs     : -
> Dual-active excluded VLANs        : -
> Graceful Consistency Check        : Enabled
> Auto-recovery status              : Enabled (timeout = 240 seconds)
>
> vPC Peer-link status
> ---------------------------------------------------------------------
> id   Port   Status Active vlans
> --   ----   ------ --------------------------------------------------
> 1    Po1    up     1,200-202,2810
>
> vPC status
>
> ----------------------------------------------------------------------------
> id     Port        Status Consistency Reason                     Active
> vlans
> ------ ----------- ------ ----------- --------------------------
> -----------
> 1      Po2         up     success     success                    200
> 2      Po3         up     success     success                    200
>
>
> On Fri, Aug 9, 2013 at 4:50 PM, Сергей Кремезной <kremeznoys at gmail.com>wrote:
>
>> Hi!
>>
>> Through what links (and their config) does Vlan200 go? If its vPC
>> peer-link, please show all vpc-related information:
>>
>> # show vpc [all possible keys]
>>
>> Good day.
>>
>> ---
>> Sergey
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at
>> http://puck.nether.net/pipermail/cisco-nsp/
>>
>> --
>> http://www.chrisk.de/
>>
>> --
>> http://www.chrisk.de/
>>