[c-nsp] multicast 3750X

[Christopher Pole]

Are you running IPBase on your CE by any chance? PIM sparse-dense mode need
at least IPServices on a 3x50 if I remember correctly (the switch will take
the commands but you'll see no multicast traffic). There is a work around
using PIM stub and manually announcing a bsr & rp candidate (
https://supportforums.cisco.com/thread/2153703) which I had to use recently.

Chris
cspole at gmail.com


On Tue, Aug 13, 2013 at 12:12 AM, selamat pagi <ketimun at gmail.com> wrote:

> Here is part of my LAB-setup:
>
> PE              (RP lo 0)
>  vrf RED   (ip igmp join-group 239.5.5.5)
>  ¦
>  ¦   PIM
>  ¦
>  CE      (SVI / PIM SM (ip igmp join-group 239.6.6.6)
>  ¦
>  ¦   IGMP
>  ¦
>  Receiver      (ip igmp join-group 239.8.8.8)
>
> --------------------------------------------
> PE5           6500 151-1.SY1
> CE   3750X             150-2.SE2
> Receiver      3750X             150-2.SE2
> --------------------------------------------
> The issue is:
> Receiver can reach 239.6.6.6 and 239.5.5.5
> PE or CE cannot reach 239.8.8.8
>
> Changing CE and receiver from 3750X to 6500,  MC-ping works from all 3
> devices to any MC-group.
>
> PE:
> (*, 239.8.8.8), 02:43:40/00:02:45, RP 5.5.5.5, flags: S
>   Incoming interface: Null, RPF nbr 0.0.0.0
>   Outgoing interface list:
>     TenGigabitEthernet2/5, Forward/Sparse, 02:39:09/00:02:45
>
> (5.5.5.5, 239.8.8.8), 00:14:15/00:02:57, flags: T
>   Incoming interface: Loopback0, RPF nbr 0.0.0.0
>   Outgoing interface list:
>     TenGigabitEthernet2/5, Forward/Sparse, 00:14:15/00:02:45
>
>
> Debug on CE does not show any output. (deb ip icmp)
>
> Is there any 3750X specific command I need to enable ?
>
> Any idea or troubleshooting advice is greatly appreciated.
>
> many thanks, keti
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>