[c-nsp] Initializing trace files on CRS

[Courtney Smith]

On Aug 21, 2013, at 12:00 PM, cisco-nsp-request at puck.nether.net wrote:

> ----------------------------------------------------------------------
> would expect that since that's what I see on other CRS that I deal with. If
> I try "show bgp trace", I get the following error:
> 
> Trace files(s) not found or has not been initialized
> 
> I get that same message when trying several other trace commands. However,
> some trace commands work, like "show arp trace".
> 
> Any idea why PIM and BGP traces aren't enabled? I haven't been able to find
> any command that initializes trace files. We don't have anything like that
> on the other routers I usually work on and I have no problems with those.
> 
> In case it's relevant, this is on XR 4.2.4.
> 
> Thanks,
> John
> 
> 
> ------------------------------


You need to run 'show bgp trace location <RP BGP process is running on>' .  You can find out the location by running 'show placement program bgp'



Courtney Smith
courtneysmith at comcast.net

()  ascii ribbon campaign - against html e-mail 
/\  www.asciiribbon.org   - against proprietary attachments