[c-nsp] End to end keepalive over QinQ provider

[Chris Evans]

Reading into this more I don't think it will do what I'm looking for it to
do..

I have two paths that I'd like to port-channel. Since they don't support
LACP the only thing I can do is do static configuration, but if the path of
one of the links takes a hit there is no end to end notifications that will
cause an interface to go down or be taken out of forwarding. With LACP you
can do this because the ports will debundle. I was hoping that CFM would
take the path out of service, but I don't think that is the case.

Thoughts?

On Tue, Feb 5, 2013 at 12:20 PM, Chris Evans <chrisccnpspam2 at gmail.com>wrote:

> Oh really... I was reading on CFM, but though it used the EOAM DMACs...
>
> let me check into that more!  thanks!
>
> Anyone have details on using CFM?
>
>
> On Tue, Feb 5, 2013 at 3:10 AM, Adam Vitkovsky <adam.vitkovsky at swan.sk>wrote:
>
>> Have you tried CFM? It uses standard Ethernet frames, though CCMs are
>> mcast
>> frames
>>
>>
>> adam
>>
>>
>