[c-nsp] 4500-X Rommon upgrade

[Andrew Miehs]

It should always be set to 0x2102.

For some reason Cisco thinks that its funny to set it to 0x2101 as default
on the Sup 7s on the 4500s...


On Thu, Feb 28, 2013 at 11:21 AM, CiscoNSP_list CiscoNSP_list <
cisconsp_list at hotmail.com> wrote:

>
>
>
> Hi Guys,
>
> Followed this guide (
> http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_24829.html)
> which worked (Did take a lot longer than expected though!), and it states
> that config-register must be set to 0x2102 - Post upgrade, it doesnt
> mention that you have to change it back to what it was originally - Is it
> necessary to change it back?
>
> Cheers
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>