[c-nsp] cisco pxe boot support

[Michael Sprouffske]

Also, the pxe is on the same subnet as the router.  I don't use helper address's.




________________________________
 From: Michael Sprouffske <msprouffske at yahoo.com>
To: "cisco-nsp at puck.nether.net" <cisco-nsp at puck.nether.net> 
Sent: Thursday, February 28, 2013 3:04 PM
Subject: [c-nsp] cisco pxe boot support
 
I'm trying to have my cisco router set the next-server address and the bootfile name.  I see the cisco dhcp server sending that info correctly to the computer but the machine never takes the offer.  If just fails trying to load from pxe.  If I take the pxe server and attach that to the machine via a switch and setup dhcp on the pxe server, the machine picks it up just fine.  I checked the pxe server and all it does is sets the next-server and the bootfile name.  Am I missing something on my cisco 2900 that is prohibiting me from doing this?
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/