[c-nsp] Cisco 7301 - xconnect on Channel-group

[Christophe Lucas]

Sorry for the noise. I Realize it is a 7301, not a 6500 or others. 
Sorry again.

Best regards,

Le 2013-01-04 10:36, noc at phibee.net a écrit :
> Hi
>
> I have a Cisco 7301 with IOS:
> (C7301-ADVENTERPRISEK9-M), Version 12.4(15)T1
>
> This cisco is connected to my supplier:
>
> interface Port-channel1
>  no ip address
>
>
> interface GigabitEthernet0/1
>  mtu 1600
>  no ip address
>  duplex auto
>  speed auto
>  media-type gbic
>  negotiation auto
>  channel-group 1
>
>
> On this link, we receive a Vlan: 850
>
> I want sent by EoMPLS this Vlan to a another router,
> on other router, without LAG, i use a traditional
>
> interface GigabitEthernet0/1.850
>  encapsulation dot1q 850
>  no cdp enable
>  xconnect xxxxxxxx
>
> But on LAG i don't know the process.
>
> if i create a:
> interface GigabitEthernet0/1.850
>  channel-group 1
>  no cdp enable
>
> i have a error:
> 7301(config-subif)#encapsulation dot1Q 850
> GigabitEthernet0/1 is a member of Port-Channel-1.
> The intended configuration is not allowed.
>
> and i don't have xconnect command
>
>
>
> if i create a :
> interface Port-channel1.850
>  encapsulation dot1Q 850
>
> it's good for Vlan but i don't have a xconnect commande on 
> port-channel
>
>
>
> what is the solution ?
> best regards
> Jerome
>
>
>
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Christophe Lucas
http://www.clucas.fr/blog/