[c-nsp] Sh mod VSS pair

[Phil Mayers]

Maybe. Check the output of sh diag to see what test failed, and schedule a re-run at your convenience 

Harry Hambi <harry.hambi at bbc.co.uk> wrote:

>Hi All, happy new year, the sh mod switch 2 command on a VSS pair shows
>the following line
>
>Mod  4  Distributed Forwarding Card WS-F6700-DFC3C     SAL1443X9PK  1.4
>   MinFail
>
>The woorying bit is the status field MinFail…..is this module about to
>fail??
>
>Rgds
>Harry
>
>Harry Hambi BEng(Hons)  MIET  Rsgb
>
>
>
>------------------------------------
>http://www.bbc.co.uk
>This e-mail (and any attachments) is confidential and
>may contain personal views which are not the views of the BBC unless
>specifically stated.
>If you have received it in
>error, please delete it from your system.
>Do not use, copy or disclose the
>information in any way nor act in reliance on it and notify the sender
>immediately.
>Please note that the BBC monitors e-mails
>sent or received.
>Further communication will signify your consent to
>this.
>------------------------------------
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Sent from my mobile device, please excuse brevity and typos.