[c-nsp] 6500e and Enhanced Poe

[Tóth András]

Hi Dan,

You don't need enterprise image for this, ipservices is sufficient.

More details about PoE config and support features can be found below:
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/power_over_ethernet.html

Best regards,
Andras



On Fri, Jan 18, 2013 at 9:24 PM, Dan Benson <dbenson at swingpad.com> wrote:

> Hello all and thanks in advance for the help on this topic.
>
> I have a 6500e that I want to power a few AP1250s using Enhanced Poe.
>
> According to a lot of documentation, I should be able to get more then
> 16.8Watts from my PoE WS-X6148E-GE-45AT ge-tx blade (which says it can
> support upto 30Watts).  My issue is that I am yet able to get more then the
> 16.8Watts on the line.  I am running advipservicesk 122-33.SXJ which is
> newer then the minimal SXH2, do I need to be running adventerprise?
>
> Thanks again for any insight on this,
>
> db
>
>
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>