[c-nsp] ISR G2 Interface RX Performance
Andrew Miehs
andrew at 2sheds.de
Fri Jan 25 22:11:43 EST 2013
Sent from a mobile device
On 26/01/2013, at 13:38, Blake Dunlap <ikiris at gmail.com> wrote:
> Another option is lightly shaping out from the switch if you don't want to
> upgrade immediately down to a more absorb-able rate for the router
> platform. You're probably barely breaking the threshold just due to the
> arrival rate, and I've had success solving this in this manner for a client
> in the past who didn't want to spend. Just be aware of the jitter this will
> introduce as a consequence.
You could possibly try enabling flow control on the interfaces - although i have no idea if this would help in your situation.
More information about the cisco-nsp
mailing list