[c-nsp] sh interfaces transceiver detail ouput

[Farooq Razzaque]

Dear tim
 
What DOM values are you getting?
 
R u also getting N/A in the following fields



           High Alarm  High Warn    Low Warn     Low Alarm
           Threshold   Threshold     Threshold     Threshold
           (Volts)            (Volts)           (Volts)    (Volts)




 


 


> Date: Sat, 26 Jan 2013 12:00:58 +0100
> From: tim at haitabu.net
> To: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] sh interfaces transceiver detail ouput
> 
> On 23.01.2013 9:57 PM, TJ Trask wrote:
> > I would guess that you don't have DOM support on your transceivers ?
> 
> On my Cat6509 12.2(33)SXI10 I can see the DOM values with
> 
> sh interfaces transceiver detail
> 
> but the Voltage values are all N/A like at Farooq output.
> 
> -tim
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/