[c-nsp] Switch lights rapid blinking

[Andy Ellsworth]

Broadcast chatter alone from 200 hosts is likely to light that up like a
Christmas tree.


On Mon, Jan 28, 2013 at 2:51 PM, Michael Sprouffske
<msprouffske at yahoo.com>wrote:

> I don't see high cpu on any switch.  Traffic seems to flow just fine.  I'm
> not sure if the ports did this the whole time or if this started one day.
> Its hard to say if there has been a change.  This network needs to be
> rebuilt with proper vlans and removing a /16 from this 200 host network.
>
>
>
>
> ________________________________
>  From: "A.L.M.Buxey at lboro.ac.uk" <A.L.M.Buxey at lboro.ac.uk>
> To: Jeffrey G. Fitzwater <jfitz at Princeton.EDU>
> Cc: Michael Sprouffske <msprouffske at yahoo.com>; "cisco-nsp at puck.nether.net"
> <cisco-nsp at puck.nether.net>
> Sent: Monday, January 28, 2013 12:50 PM
> Subject: Re: [c-nsp] Switch lights rapid blinking
>
> Hi,
>
> > Alan, there are many normal things that can cause this, like ARP
> broadcast, unknown unicast especially in a large flat nets.
>
> as I said, it could be the usual blinking...they do blink a lot even in
> a test/lab environment... and checking whats going on on uplink
> might be key for flat network checking. the checking counters/processor etc
> that was also mentioned is useful.
>
> alan
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>