[c-nsp] nexus 7k force FTP source interface ?

[Dirk Woellhaf]

Hi,

maybe you can use the management VRF. There you should have only one IP.

copy run ftp://x.x.x.x vrf management



Am 30.01.2013 um 15:44 schrieb "Jeffrey G. Fitzwater" <jfitz at princeton.edu>:

> I am trying to FTP xfer config file to server, which we have configured to only allow the nexus loopback0 as SRC IP, but xfer fails because SRC is one of the L3 VLAN IPs NOT loopback0.
> How can I force FTP to use a certain IP interface, specifically from management loopback?
> 
> 
> 
> So far I see no way to force FTP source.
> 
> 
> If I use TFTP I can set the source but I do not want to use TFTP.
> 
> Thanks for any help.
> 
> 
> Jeff Fitzwater
> OIT Network Systems
> Princeton University
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/