[c-nsp] Static Route

[chris stand]

I had the same issue but my router IOS did not support IP SLA, I did it
with EEM.
Ping,
  see if reply
    add route
  if no reply
    remove route
wait 15 seconds, do ping again



>    3. Static Route (M K)
>
>
> ------------------------------
>
> Message: 3
> Date: Thu, 4 Jul 2013 15:03:42 +0300
> From: M K <gunner_200 at live.com>
> To: "cisco-nsp at puck.nether.net" <cisco-nsp at puck.nether.net>
> Subject: [c-nsp] Static Route
> Message-ID: <DUB113-W628CB367E42F15B23976B1CB7C0 at phx.gbl>
> Content-Type: text/plain; charset="windows-1256"
>
> I have two routers connected to each other , I have configured a loopback
> interface on The second router and configured a static route to reach it ,
> now when i shutdown the loopback interface the static route is still in the
> routing table , how can i remove that route automatically when i lose
> reachability to the loopback interface ? should i use IP sla ?
>
>