[c-nsp] Same static-route to different destination /

[Muhammad Asim Hussain]

 Port-chanel
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit

Please use port-channel load-balance src-dest-IP command at global
config.
Hope after this implementation both links will be equally load balance.

best regards
Asim
From: Ahmed Hilmy
Sent: 18/07/2013 01:39
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Same static-route to different destination /
Port-chanel
Hello Friends,


Can i configure a static route for prefix x.x.x.x/y to different
destinations a.a.a.a & b.b.b.b ?

Router 1  -------- Router 2 directly connected.


I want to do this thing because i have port-chanel between R1 - R1 with two
interfaces, one of them is carrying 990 Mb but 2nd one is only carrying 60
Mb.

Config is identical on bundle members.


Please advice.


Regards,

Ahmed
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/