[c-nsp] Same static-route to different destination / Port-chanel

[Gordon Smith]

 Configure the load balancing algorithm for the portchannel.

 e.g.
 switch(config)# port-channel load-balance ethernet {destination-ip | 
 destination-mac | destination-port | source-dest-ip | source-dest-mac | 
 source-dest-port | source-ip | source-mac | source-port}

 Cisco uses source-dest-mac as the default



 On Wed, 17 Jul 2013 23:28:45 +0300, Ahmed Hilmy wrote:
> Hello Friends,
>
>
> Can i configure a static route for prefix x.x.x.x/y to different
> destinations a.a.a.a & b.b.b.b ?
>
> Router 1  -------- Router 2 directly connected.
>
>
> I want to do this thing because i have port-chanel between R1 - R1 
> with two
> interfaces, one of them is carrying 990 Mb but 2nd one is only 
> carrying 60
> Mb.
>
> Config is identical on bundle members.
>
>
> Please advice.
>
>
> Regards,
>
> Ahmed
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/