[c-nsp] PWHE on asr9k license requirements

[Jared Mauch]

I believe you need 4.3.1 if you are going to do IPv6 for PWHE.

- Jared

On May 31, 2013, at 8:09 PM, Pshem Kowalczyk <pshem.k at gmail.com> wrote:

> hi,
> 
> There are no special licences required. And even if there were - atm it's
> an honesty based system. All you get is a message in the log.
> 
> kind regards
> Pshem
> 
> Sent from my mobile
> On Jun 1, 2013 6:44 AM, "Markus Binder" <Markus.Binder at globalways.net>
> wrote:
> 
>> Hi,
>> are there any license requirements for PWHE Feature on asr9k?
>> We want to tunnel customers from our 6500/7600 access to L3 distribution
>> via MPLS Pseudowire.
>> 
>> LDP and VCs are up, L2 works, we see correct mac-addresses from 6500/7600
>> to ASR, but no L3 Traffic, i.e. ICMP is not working.
>> 
>> Is this a licensing issue? Or are we missing anything obvious?
>> 
>> Cheers,
>> Markus
>> 
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/