[c-nsp] Combine two 2-wire DSL

[Pavel Dimow]

Yes the circuit in question is SDSL. Is there any other special
requirements? The ISP does support 4-wire mode but I don't understand
should I create one or two pvc's and how to combine them via multilink or
virtual-template. I tried both and I always get 2304 speed instead of 4608

On Tuesday, June 4, 2013, Tony wrote:

> It requires the other end (exchange end) to be plugged into an equivalent
> type card on the dslam that can combine the 4-wires into a single service.
>
> Can you even do ADSL on 4-wire ? I know SHDSL can be done over 4-wire.
>
>
> regards,
> Tony.
>
>   ------------------------------
>  *From:* Pavel Dimow <paveldimow at gmail.com <javascript:_e({}, 'cvml',
> 'paveldimow at gmail.com');>>
> *To:* "cisco-nsp at puck.nether.net <javascript:_e({}, 'cvml',
> 'cisco-nsp at puck.nether.net');>" <cisco-nsp at puck.nether.net<javascript:_e({}, 'cvml', 'cisco-nsp at puck.nether.net');>>
>
> *Sent:* Tuesday, 4 June 2013 5:46 AM
> *Subject:* [c-nsp] Combine two 2-wire DSL
>
> Hi,
>
> is it possible to combine two 2-wire DSL's into one 4-wire DSL using Cisco
> 4-wire DSL card on 1841?
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net <javascript:_e({},
> 'cvml', 'cisco-nsp at puck.nether.net');>
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>