[c-nsp] ipv6

[Rati Berikaant Jokhadze]

Hi , No if you need to use SLAAC , you should have configured /64 on the 
interface

./Rati

On 06/06/2013 05:04 PM, Aaron wrote:
> Thanks Jay, can you issue a /56 via SLAAC ?  ...DHCPv6 ?....  in otherwords,
> is there an automated/dynamic way to issue this /56 you mention ?
>
> Aaron
>
> -----Original Message-----
> From: Jay Ford [mailto:jay-ford at uiowa.edu]
> Sent: Wednesday, June 05, 2013 5:46 PM
> To: Aaron
> Cc: 'TJ'; 'Michael Nicks'; cisco-nsp at puck.nether.net; aaron.gould at gvtc.net
> Subject: RE: [c-nsp] ipv6
>
> Aaron:
>
> Also, as an ISP you should delegate a IPv6 prefix (such as a /56) to each of
> your customers rather than just a single address.  We don't have that issue
> because we consider our campus user devices as leaf devices, but customers
> of an ISP are entitled to a prefix larger than /64 which they can divide
> into
> /64 subnets for their internal use.
>
> Jay
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/