[c-nsp] Layer 2 Traffic Monitoring

[Samar Chokutaev]

Thank you, Aaron.

But span/rspan is not a solution for us.
Because it does not separate internet/IX traffic.
On a worstation we need some tools to do it.
Also where is so much traffic to send it via rspan.

Samar




2013/6/12 Aaron <aaron1 at gvtc.com>

> Perhaps span/rspan if you just wanna mirror the traffic off to another port
> and look it it.
>
> Aaron
>
> -----Original Message-----
> From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
> Samar Chokutaev
> Sent: Tuesday, June 11, 2013 3:33 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Layer 2 Traffic Monitoring
>
> Hello, everyone
>
> Could you please help me in trouble with traffic monitoring.
> We have IX-network with a pair ME3400 with only Layer 2 enabled. All
> providers connected to this switches communicate directly with each other
> (we use route servers).
> Now we need traffic monitoring for IX network. But the problem is that some
> of these providers buy Internet connection from the same link. That's why
> we
> need to separate internet traffic from the local.
>
> Is there any solution for this problem, except the usage of Netflow?
>
> Thank you in advance.
>
> Kind regards,
> Samar
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>


-- 
=================
Best regards,
Samar Chokutaev
Network Engineer
CCNA, CCNP
=================