[c-nsp] How to CoPP (Control Plane Policing) configuration?

[PlaWanSai RMUTT CPE IX]

Can I use this for determining?
http://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/software/releas
e/15.2_2_S/configuration/guide/swcopp.html#wp1166449
Now, I separated to 5 access-lists.
1. For LDP and BGP.
2. For telnet, SSH, SNMP, NTP, TACACS, ftp, and TFTP.
3. For ICMP.
4. For traffic that fragments.
5. For All
I don't know these are enough. And What is a number should be use for police
each access-list?

Thank you very much.

-----Original Message-----
From: Mack McBride [mailto:mack.mcbride at viawest.com] 
Sent: Friday, June 14, 2013 1:22 AM
To: PlaWanSai RMUTT CPE IX; cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] How to CoPP (Control Plane Policing) configuration?

First step is determining what is actually hitting your control plane and
what the maximum traffic levels for that traffic should be.

For some platforms like the 6500 you have to deal with traffic requiring ARP
And ICMP responses as well as what should be hitting the cpu for control and
routing protocols.  There are also spanning-tree packets and other things
that have to be accounted for.

-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
PlaWanSai RMUTT CPE IX
Sent: Thursday, June 13, 2013 3:03 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] How to CoPP (Control Plane Policing) configuration?

Could you please how to CoPP (Control Plane Policing) configuration?

It has a best practice for each model?

Now, I want configuration for ME-3600x.

 

Thank you very much.

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/