[c-nsp] ASR901 to ME3600X xconnect

[Pshem Kowalczyk]

Hi All,

One other limitation that I've noticed  is that QinQ and xconnect
don't currently work together (the AC is always down for dual-tagged
encapsulation).

>From the document:

http://www.cisco.com/en/US/docs/wireless/asr_901/Configuration/Guide/swevc.html

Restrictions

•Pop 2 configuration is supported for IP only scenarios.

•Pop 2 is not supported for MPLS, L2VPN, and MPLS VPN deployments.

•Pop 2 configuration is not supported for the port channel interfaces.

•Pop2 is supported for layer 3 operations only; it is not supported
for layer 2 operations (though the router allows you to configure pop
2 for layer 2 as well).

•ACL and QOS configurations for pop2 EVC scenarios are not supported.


The funny thing is that pop 2 does seem to work for MPLS (i.e. ISIS +
RSVP-TE or ISIS + LDP), unless the meaning of MPLS is different here.


kind regards
Pshem