[c-nsp] CRS-1 FP-40

Abdelfattah Ghattas abdelfattah.ghattas at gmail.com
Sun May 5 10:08:55 EDT 2013


Hello Tin,

We are using FP-40 instead of the MSC, and it is working fine with no bad
experience at all, we are not affected by its limitations as we did not
need the extra features found in the MSC, so i encourage you to go for it
if it is sufficient for your needs.


On Tue, Nov 3, 2009 at 6:13 PM, Tin Nguyen <tin.nguyen at sasktel.sk.ca> wrote:

>
> Hello all,
>
> I am looking to learn of any good or bad deployment experience with the
> new Cisco CRS-1 FP-40 module. Besides the limitations outlined in cisco's
> datasheet (less pps and QoS queue than MSC-40), is there any other gotcha's
> that you have found in testing or deployment?
>
> Thank you for sharing your experiences in this matter,
>
> Tin
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


More information about the cisco-nsp mailing list