[c-nsp] router selection......

[Blake Dunlap]

i think you can do a 3925 up to about 500, past that you're looking at one
of the upgraded SPEs in the 3925e series or maybe an asr if you're feeling
ambitious.

-Blake


On Fri, May 24, 2013 at 9:53 AM, Scott Voll <svoll.voip at gmail.com> wrote:

> Sorry for the cross post.  But I wasn't sure which was the better forum to
> post in.
>
> I currently have a 2951 running voice, Security, VPN, and Data.  it works
> really great for our current needs.  BUT we are going to start pushing more
> that 300mbps and this router is only rated for 296mbps per the spec sheet.
>
> What is the next move up to support up to gig throughput and still support
> ZBFW, GRE, IPSEC, PRI's for Voice, and QoS at Gig speeds?
>
> Do I have to separate out my WAN (use an ASR) and then continue with the
> 2951 for my security / voice?
>
> What are my options?
>
> Thanks
>
> Scott
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>